1、 Technical parameters related to the crusher

Continuous feeding crusher

Product features:

1. Crush dry substances such as leaves, herbs, fibers, rhizomes, and wood. Oily viscous substances are not suitable for crushing;

2. Continuous operation while feeding and discharging;

3. Exquisite and thick, beautiful and durable;

4. Food grade stainless steel;

5. Low noise;

2、 100L heatable extraction tank

Product parameters:

♦ Model: BN-CQ-100L;

♦ Tank volume: 100L;

♦ Tank material: SS304;

♦ Design pressure: atmospheric pressure;

♦ One set with mixing system, including mechanical seal;

♦ One mirror and one sight lamp each;

♦ Heating requirements: Electric heating system, temperature adjustable;

♦ Processing requirements: All welds shall be ground flat, smooth and free from sanitary dead corners, with sanitary mirror polishing inside the tank, and external surface polishing and wire drawing treatment;

♦ Including the following nozzles:

三、Configuration standard for technical parameters of Ceramic membrane pilot filtration system

Equipment name: Ceramic membrane pilot filtration system (BONA-GM-M22)

Product parameters:

♦ Minimum circulating volume: 7L;

♦ Material tank: 48L;

♦ Working pressure: 0-0.4MPa;

♦ Power supply voltage: 380V;

♦ Allowable working temperature: 5-80 ℃;

♦ Pump power: 1.5KW;

♦ PH applicable range: 0-14;

♦ Filtration rate: 20-100L/H;

♦ Single core filtration area: 0.24m2;

♦ Module size parameters: Length: 1016mm Inner diameter: ф 30 mm;

Product features:

1. Equipped with automatic overpressure protection function, overpressure automatic shutdown; Equipped with over temperature automatic protection, over temperature automatic shutdown;

2. Adopting a dual membrane shell parallel structure, it can be switched through valves, using either membrane element or two membrane elements simultaneously. Can replace 50nm, 100nm, 200nm, 400nm, 600nm, 800nm, 1um, 1.2um, 1.5um, 2um, 30nm (200KD), 20nm (150KD), 12nm (100KD), 10nm (20KD), 5nm (8000D), 3nm (2000D) Ceramic membrane components;

3. All stainless steel welding adopts automatic argon filling protection, with single sided welding and double sided forming. The internal and external surfaces of the pipeline have excellent quality, simple operation, cleanliness, hygiene, safety, and reliability;

4. Equipped with a heat exchanger, it can cool or heat up materials;

Basic configuration:

One multi-stage vertical centrifugal pump (South Pump), two SUS304 Ceramic membrane modules and two Ceramic membrane (one 20nm membrane element and one 200nm membrane element); Two shockproof pressure gauges, one temperature gauge, one pressure regulating valve, and one material tank; One heat exchanger; Several equipment supports, chain clamps, pipelines and their connectors; A set of variable frequency starting system.

4、 Technical parameter configuration standard for multifunctional organic membrane pilot plant

Equipment Name: Multifunctional Organic Membrane Pilot Plant (BONA-GM-1818)

Technical parameters:

♦ Minimum circulating volume: 8L;

♦ Material tank: 48L;

♦ Working pressure: 0-2.6MPa;

♦ Power supply voltage: 380V;

♦ Allowable working temperature: 5-55 ℃;

♦ Pump power: 3.75KW;

♦ PH applicable range: 2-12;

♦ Filtration rate: 5-100L/H;

♦ Equipment size: 1200 (length) × 800 (width) × 1000 (height) mm;

Product features:

1. Membrane components: Imported membrane components are used. Equipped with one 3000D ultrafiltration membrane element and one 100D nanofiltration membrane element, the membrane element meets FDA, USDA, and 3-A hygiene standards;

2. Equipped with automatic overpressure protection function, overpressure automatic shutdown; Equipped with over temperature automatic protection function, over temperature automatic shutdown;

3. Can be replaced with other models of microfiltration, ultrafiltration, nanofiltration, and reverse osmosis membrane components;

4. All stainless steel welding adopts automatic argon filling protection, with single sided welding and double sided forming. The internal and external surfaces of the pipeline have excellent quality, simple operation, cleanliness, hygiene, safety, and reliability;

Basic configuration

Two multi-stage vertical centrifugal pumps (Southern Pump), two SUS304 stainless steel membrane components, and two membrane cores; Two shockproof pressure gauges, one temperature gauge, one pressure regulating valve, and one jacket material tank; Several equipment supports, chain clamps, pipelines and their connectors; A set of variable frequency starting system.

5、 LPG-5 centrifugal spray dryer

LPG-5 centrifugal spray dryer

Product parameters:

♦ Evaporation: 5kg/h;

♦ Inlet air temperature: 200~220 ℃;

♦ Heat source: electric heating;

♦ Drying method: spray drying;

♦ Receiving method: cyclone receiving;

♦ Material: The main tower is made of 304 stainless steel;

♦ Power supply: 380V 50Hz three-phase four wire;

♦ Total power: 17.5KW;

♦ Overall dimensions: length 2.2 * width 1.3 * height 2.3m;

♦ Inside the tower Φ： 1.0m. Straight section height: 1.2m;

Device configuration:

6、 Relevant technical standards for 200L/H pure water machine (BONA-GM-W200)

Water quality parameters:

1. Inlet water source: municipal tap water;

2. Inlet pressure: water pressure 1-3kg/cm2, water temperature 5-35 ℃;

3. Working power supply: 110-220V/50-60HZ, electrical power: 300W;

4. The system installation covers an area of 1.2m2;

5. Overall dimensions of the host: (left and right length * front and rear width * height) 850 * 600 * 1350mm;

6. Water yield: 200L/H;

Production water quality:

1. The purified conductivity is about 2-3% of the source water conductivity;

2. Unit price ion desalination rate 97%;

3. The removal rate of multivalent ions is 99%;

4. Bacterial removal rate>99.9%;

5. The removal rate of heavy metals is greater than 99.99%;

Electrical characteristics:

1. Microcomputer control, fully automatic water making, touch buttons, more convenient to use;

2. Automatic cleaning upon startup, manual random cleaning and maintenance, periodic and timed automatic cleaning of RO membrane;

3. Multiple safety protection functions, automatic protection for water shortage, low water pressure, high pressure, and full water tank;

4. Imported reverse osmosis membrane with a desalination rate of up to 96%;

5. High voltage and low voltage protection functions;

6. Sheet metal spray plastic shell, bottom rust prevention treatment, safety insulation performance meets GLP requirements;

7. Adopting a modular and quick connect design, maintenance and upkeep are more convenient and fast;

8. Standard quick plug-in external equipment water supply port, system can be upgraded;

9. The entire pipeline is connected with quick plug connectors, and all pipelines and connectors have passed NSF certification;

10. Floor standing design with movable and fixed feet at the bottom for easy installation and movement;

11. Adopting human safety voltage power supply and water and electricity separation structure, meeting safety standards and meeting the requirements for use in humid environments;